It used to be that in the event of a major outage or hardware failure you would need to issue additional debug commands to the effect of "I know this isn't your approved SFP but please just try it," if you were trying to replace a first party SFP with a third party one. TAC would more or less laugh at you and hang up if you sought support.

I'm not sure if this product will _actually_ change any of that, but here's hoping.

My setup is definitely more on the prosumer side, but it's been so build out and inspect my network with their tools.

All my switches are MikroTik. My SFP+ modules are MikroTik, Ubiquiti, and some 3rd party ones from before I knew better.

I've had modules that will only run at gigabit in one switch but will give me the full 10 gb in another. I've had modules that refuse to work in one MikroTik switch but will happily work in a different MikroTik switch. I've just had a world of pain.

I've got everything basically working after months of fiddling and I'm inclined to just not… touch… anything.

I have two ISPs, one with IPv6 (Starlink) and one without (Frontier).

I want to use Frontier for all IPv4, with IPv4 failover to Starlink, and I want to use Starlink only for IPv6.

UniFi networking won’t let you configure this, and I’m not going to SSH in to my UDM to manually set routes, that will be lost at next boot.

Also, reading "Just insert any brand’s SFP or QSFP module, select Copy, and insert any UI module to write the profile." suggests that this only works to reprogram UI optics

And does it only write to SFP modules from Ubiquiti (looking at you FS BOX)?

Another tool you can use for this (without a nice UI) is the SFP Buddy: https://oopselectronics.com/product/SFPB

Didn’t need reprogramming.

The quality is fine, oldest modules more than 5 years old and only 1 failure in 100.

I never knew you could program them. How smart are they? Are there ones capable of running Linux?

most manufacturers of devices - the things with the holes, NICs, switches, routers - make their devices only officially work with modules that claim to be manufactured by that same manufacturer. so, you can either buy modules from that manufacturer, or buy modules from some other company (e.g. fs.com, 10gtek) who programs the modules to claim that they are from that manufacturer. "officially" can mean anything from "we won't help you if you open a support case" to "the device will make a whiney log message on boot if it's not one of our modules" to "it simply doesn't work unless you hack an EEPROM on the device".

this is somewhat annoying, since it means you need to buy specific modules for specific devices, you can't just keep a pile of SFP+ 10G-LR modules around, you need some "Intel SFP+ 10G-LR" and some "Cisco SFP+ 10G-LR", etc.

so, these third party manufacturers of the modules, like fs.com and 10gtek, will also sell you programmers for the modules, which lets you change what manufacturer the module claims made it. these programmers have been, historically and hilariously, tied to the actual manufacturer of the modules! so you can buy some 10G-LR SFP+ modules from fs.com and a fs.com programmer to set make some "Intel" and some "Cisco", but if you buy some 10gtek 10G-LR modules, you would need to buy a 10gtek programmer.

~so, this device that Ubiquiti has made is the meta-programmer - it can apparently program any module, from any actual manufacturer, to claim to be made by any manufacturer.~

edit: the post seems deliberately confusing - what they are actually selling is a device that can re-program Ubiquiti SFP+ modules by copying the manufacturer code from another SFP+ module that you insert into the programmer. so it's the same as what fs.com and all the other sell, but Ubiquiti's is ~1/10th the price (e.g. https://www.fs.com/uk/c/fs-box-3389).

https://www.fs.com/products/96657.html

Which, while it works, is the poster child for how NOT to develop desktop software as it's a really shitty .NET GUI app they shoehorned onto non-Windows platforms.

> Instantly tests SFP and QSFP module health, including Rx/Tx power.

Most SFP modules will fail due to heat, like LED bulbs. So an instant test is of course instantly useful, but not indicative of production-use SFP health.

As a programming tool, of course it's awesome.

Of course, in typical ubiquiti fashion, it's out of stock with no way to backorder.

Oh come on!